We recommend tacking the design wall to your wall with our Quilter's Tacks (link below) - you can leave up as we do or remove as needed. Use our Quilter's Tack tool Remover Tool to easily remove and reuse tacks later (link below). The small holes in drywall are easy enough to simply touch up with a bit of paint.

You may also hang it against a wall - simply fuse a strip of Heat & Press Seam Tape Roll (link below) to the side you want to hang, and then add a row of Grommets (link below) about a foot apart (the fusible tape will stabilize the edge for the grommets). You may also layer multiple designs walls over each other as you change projects.

No wall space? You can quickly add Grommets (link below) to one side of the design wall and hang it which makes it usable on BOTH sides. Simply fuse a strip of Heat & Press Seam Tape Roll (link below) to the side you want to hang, and then add a row of Grommets (link below) about a foot apart (the fusible tape will stabilize the edge for the grommets). Please note that a design wall that is hung freely (not against a wall) will have movement when you are using it. Great for hanging from a shower rod or closet door.

Wrap your design wall around panels of insulation boards available at your local hardware store. Use our Quilter's Tacks (link below) to secure to back side of panel. You can do multiple panels to make as large as needed.

You can also place your design wall on the table or floor - just roll-n-go (cover first with tissue for ease in unrolling with fabric) keeping all of your work just the way you placed it.

Easily combine design walls by sewing or use Heat & Press Seam Tape Roll to combine (image links below). You may also cut down smaller if needed.